• IRRIDI ONE-DAY 30 LENSES
  • IRRIDI ONE-DAY 30 LENSES
  • IRRIDI ONE-DAY 30 LENSES
  • IRRIDI ONE-DAY 30 LENSES
  • IRRIDI ONE-DAY 30 LENSES
  • IRRIDI ONE-DAY 30 LENSES
IRRIDI ONE-DAY 30 LENSES
1003

IRRIDI ONE-DAY 30 LENSES

Irridi® One Day is your naturally wettable lenses designed to meet the challenges of your busy life such as digital device use, air conditioning, travel and sports, while offering unmatched hygiene levels with 3x less bacterial contamination thanks to our unique packaging design. You will also enjoy the benefits of aspherical lens design for unrivaled HD vision, even in low light conditions. On top of everything, your life will be made easier facing no longer difficulties on your lens fitting experience thanks to Irridi® easy peel and eco-friendly foil.

Power (SPH/PWR)
Base curvature (BC)
Diameter (DIA)

Description

 

Naturally wettable lenses designed to meet the challenges of your busy life such as digital device use, air conditioning, travel and sports.

Irridi® One Day lenses help to maintain tear integrity for longer throughout the day.

The double hydroxyl groups of HEMA-GMA naturally attract and bond tightly width tears.

Over two thirds of wearers say Irridi® One Day lenses are more comfortable and less dry at the end of the day than their usual daily disposable lenses.¹

The biomimetic material bonds naturally with tears using a similar binding mechanism to that of tear film mucous, locking in moisture, and allowing rapid lens rehydration with every blink.

CENTRAFORM™ EDGE DESIGN - AN EDGE FOR COMFORT

Unique edge designed for optimum comfort with a smooth edge and low friction.
Our lenses extremely low edge profile creates minimal conjunctival and lid disruption allowing the lid to move comfortably over the lens.

3x less bacterial contamination with our unique packaging design

The number of bacterial colonies isolated from lenses after handling to remove from packages.

The wearer only touches the outer surface of the lense thanks to Irridi® One Day smart packaging allowing the inner surface of the lens to remain uncontaminated up to the point of insertion.

Less touching, less contamination


On opening the outer lens surface always faces up

Eliminating the need to touch the inner lens surface

Reducing the risk of contaminating the inner lens surface

Minimal handling for improved hygiene

Aspherical design for unrivaled HD vision, even in low light conditions.

With spherical lenses, spherical aberration can cause blurriness because the focal point of light rays passing through the lens varies according to the ray’s distance from the lens center.

With Irridi® One Day aspherical lens design, spherical aberration is minimized, light rays come together at the correct focal point to help promote a sharp, clear view especially in low light.

No more difficulty on your lens fitting experience thanks to Irridi® easy peel foil.

At barely 1mm thick each foil blister pack is designed to minimize lens handling so contact lenses can be worn with confidence and comfort.

Our thoughtfully designed ultra-slim, lightweight packaging is easy to store taking up little space, great when travelling or for sport and comes with a convenient 30 lens storage case.

YOUR CHALLENGE

Our research tells us that lens wearers have the following issues:

  • Difficulty opening blister packs
  • Difficulty locating lens in blister
  • Difficulty in determining correct lens orientation

OUR SOLUTION

Easy to open
Easy to wear
Easy to apply
Unique soft and easy peel foil.
Single use lens, wear once and throw it away.
The right side up - guaranteed.

Reusable and recyclable flat packaging made of recycled raw materials.

Irridi® One Day boast eight times thinner and recyclable packaging for minimal waste and thus the lowest possible environmental footprint because they are produced with:

  • Less raw material
    Due to their thinner packaging.
  • Less waste
    Only 20% waste compared to conventional packaging.
  • Recycled and recyclable materials
    Storage case is made from recycled mould plastic of the lenses production process. Apart from that, our primary packaging is both reusable and recyclable
BLISTER CASE
CONVENTIONAL
IRRIDI® ONE DAY
THICKNESS
8mm
1mm
VOLUME
0.5-0.8ml
0.2ml
MATERIAL
Hioxifilcon A / Advanced Hydrogel
WATER CONTENT
57%
HANDLING TINT
Light blue
DESIGN
Aspheric
MANUFACTURING
Centraform™
MADE IN
Singapore
BASE CURVE
8.6mm
DIAMETER
14.2mm
CENTRE THIKNESS @ -3.00D
0.1mm
REPLACEMENT
Daily wear, daily disposable

Product Details

Specific References